430 Stainless Steel Sheet

Introduction:
1. Low MOQ and Flexible Production Ability.
2. Quick delivery and standard industry exporting package.
3. Best service with quick  reply 
4. OEM and ODM, welcome customers to visit our factory for better understanding;
5. Value friendship and trustworthy, devote to provide long-term service to our distinguished customers.

 

Contact Us

sales@jrstainless.com

Tel/WhatsApp/WeChat:+86 13774486867

Inquiry

Product Introduction

Specifications of Stainless Steel Sheet
StandardASTM, JIS, DIN, AISI, KS, EN...
Martensite-FerriticSs 405 , 409, 409L, 410, 420, 420J1 , 420J2 , 420F , 430 ,431...
Austenite Cr-Ni -Mn201, 202...
Austenite Cr-Ni304, 304L, 309S, 310S...
Austenite Cr-Ni -Mo316, 316L...
Super Austenitic904L,  220 , 253MA, 254SMO, 654MO
DuplexS32304 , S32550 ,S31803 ,S32750
Austenitic1.4372 ,1.4373, 1.4310, 1.4305, 1.4301, 1.4306 , 1.4318 ,1.4335, 1.4833 ,  1.4835 ,  1.4845,  1.4841, 1.4401 , 1.4404 , 1.4571 ,1.4438, 1.4541 , 1.4878 ,  1.4550 , 1.4539 , 1.4563 , 1.4547
Duplex1.4462 , 1.4362 ,1.4410 , 1.4507
Ferritic1.4512, 1.400 , 1.4016 ,1.4113 , 1.4510 ,1.4512, 1.4526 ,1.4521 , 1.4530 , 1.4749 ,1.4057
Martensitic1.4006 , 1.4021 ,1.4418 ,S165M ,S135M
Surface FinishNo. 1, No. 4, No. 8, HL, 2B, BA, Mirror...
SpecificationThickness0.3-120mm

Width*Length1000 x2000, 1219x2438, 1500x3000, 1800x6000, 2000x6000mm
Payment TermT/T, L/C
PackageExport standard package or as your requirements
Deliver Time7-10 working days
MOQ1 Ton


WechatIMG3079.jpeg


Chemical Composition
GradeC≤Si≤Mn≤P≤S≤NiCr
2010.1515.50-7.500.50.033.50-5.5016.00-18.00
2020.1517.50-10.000.50.034.00-6.0017.00-19.00
3040.08120.0450.038.00-11.0018.00-20.00
304L0.03120.0450.038.00-12.0018.00-20.00
3090.2120.040.0312.00-15.0022.00-24.00
309S0.08120.0450.0312.00-15.0022.00-24.00
3100.25120.040.0319.00-22.0024.00-26.00
310S0.08120.0450.0319.00-22.0024.00-26.00
3160.08120.0450.0310.00-14.0016.00-18.00
316L0.03120.0450.0310.00-14.0016.00-18.00
316Ti0.08120.0450.0310.00-14.0016.00-18.00
4100.15110.040.030.611.50-13.50
4300.120.1210.040.030.616.00-18.00



Surface Finish of Stainless Steel Sheet
Surface FinishDefinitionApplication
No.1The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.Chemical tank, pipe
2BThose finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.Medical equipment, Food industry, Construction material, Kitchen utensils.
No.4 Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.Kitchen utensils, Electric equipment, Building construction.
HairlineThose finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.Building Construction.
BA/8K MirrorThose processed with bright heat treatment after cold rolling.Kitchen utensils, Electric equipment, Building const

5-1-10.jpg

Our-Factory.png.png

WechatIMG3078.jpeg

Knowledge-of-Stainless-Steel.png.png

201 Stainless Steel

Copper content: J4>J1>J3>J2>J5.

Carbon content: J5>J2>J3>J1>J4.

Hardness arrangement: J5, J2>J3>J1>J4.

The order of prices from high to low is: J4>J1>J3>J2, J5.

J1(Mid Copper): The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.

J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting. In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting, polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.

J3(Low Copper): Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.

J4(High Copper): It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.


304 Stainless Steel

304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel.


316 stainless steel

316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic). Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.


430 stainless steel

Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed. Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.

FAQ.png.png

Q1:How about your delivery time?

Noramll for small order with standard size and quantity less than 50Tons, we can make it ready in 1-2 weeks,for big order, it depends on our stock.

 

Q2:How about your payment term?

We can work with payment by TT or LC at sight.

 

Q3:Can you provide samples?

Small quantity of samples can be provided on request freely, the shipping freight should be on customer's side.

 

Q4:How about your MOQ?

Normally MOQ is 1-2 Tons, but we can accept smaller quantity if have stock.

 

Q5:How can you guarantee the quantity?

We have a strict quality control system cover each step of the producition,from the raw materials to the shipment,we can also accept the inspection by any third party.


PRE:The first one

Online Message

Submit

Other Products